How Much Does a Shop Sign Cost?
Book on LINEA vinyl sign with frame runs 250–450 baht per square metre; an LED acrylic lightbox sign runs 1,800–3,500 baht per square metre. The biggest factor by far is whether the sign is lit from within, which adds LED, wiring and a control unit on top of a plain printed panel.
- Response time
- within 24 hours
- Warranty
- 7 days
- Rework guarantee
- Yes
- Visit fee (same province)
- THB 500
| Item | Price |
|---|---|
| Vinyl sign with frame | THB 250–450 / sq.m. |
| LED acrylic lightbox sign | THB 1,800–3,500 / sq.m. |
| Sign-light repair / LED replacement | THB 500–1,500 / point |
Market reference range · actual price per quotation · Market estimates, not yet derived from completed jobs · last reviewed July 2026
The real price comes from the technician’s quotation. Usually it is priced from the photos and details you send on LINE, with no visit first; for some jobs the technician needs to see the site first and then sends the quote. Either way you confirm the price, and only then does the work start.
A visit costs 500 baht when the technician comes from your own province and 2,000 baht from another one. It is counted inside the quote’s single total rather than billed separately, and it is not refunded if you look and decide against the repair.
If a job needs the technician to see the site before a quote can be given, and that look ends with you deciding against the work, whether the visit is charged depends on the job; you are told before the visit.
The quoted total covers every item you confirmed, but not replacement parts: whether any are needed can only be established on site, and if they are, they are charged on top of the total.
What changes the price
- Size and material chosen — vinyl is cheapest, acrylic sits in the middle, and stainless steel or custom-shaped signage costs more
- Whether the sign is internally lit and needs new wiring run to it — a lightbox sign needs LED strips, a control unit and a wiring run that a plain vinyl panel doesn't
- Mounting height and whether a lift or scaffolding is needed — a sign mounted high on a building costs more in equipment and safety measures than one at street level
- How complex the design and lettering is — raised lettering or a custom-cut shape takes longer to produce than a plain printed rectangle
How to spend less
- Choose a vinyl sign over a lightbox if constant illumination isn't essential — it saves on both the upfront material cost and the electricity bill over time
- If the lightbox is flickering or a section has gone dark, ask for a spot repair on just the LED strip rather than replacing the whole sign — much cheaper if the frame and acrylic panel are still in good condition
- Have your wording and desired size ready and confirmed before the first quote — fewer design revisions means faster production
Frequently asked questions
Am I being charged a foreigner price for this?
The ranges here are the same market reference regardless of who's asking. What actually protects you is that the technician confirms the price for your exact size, material and design over LINE, in writing, before production starts — compare it against this page and question anything that doesn't fit.
Do I need permission from the district or municipal office to put up a sign?
Large signs, or ones that project out from the building, often need a permit in some areas — that's the shop owner's own responsibility to file. The team can provide the sign's dimensions and design to support your application, but doesn't file it on your behalf.
My lightbox is flickering in one spot — do I need a whole new sign?
Not usually. Most of the time it's just the LED strip that's failed, which is repaired or replaced at a fraction of the cost of a new sign. A full replacement is only needed if the frame or acrylic panel itself is actually damaged.
Why is a lightbox sign so much more expensive than a vinyl one?
A lightbox needs an acrylic frame, LED strips, a control unit and wiring on top of what a vinyl panel needs — it's a materially different build, not a markup on the same product.
Ready to get it fixed?
Message us on LINE. The price comes back before anyone turns up.
What to put in the first message
- 1photos of what is broken — one wide, one close on the problem
- 2what it is doing, when it started and how long it has been like that
- 3the province or district the technician has to come to
- 4the times of day a technician can come